123 results found
-
Connect Kandao Meeting Ultra to Smart MX or RX via HDMI out port
Connect a complete video conferencing system like the Kandao Meeting Ultra to the HDMI OUT of the new Google EDLA monitors (V5e RX). In order to use the Smart monitor whiteboard app during a video conference initiated by the Kandao Meeting Ultra system (it is equipped with an HDMI IN 2.0 port).
Now the display of the Kandao Meeting Ultra remains black.
The only way to use it correctly is by using the HDMI OUT port of the OPS Smart.1 vote -
Remotely Configure MX System Update Settings from SMART Remote Management
We have 150 MX boards (66% V5), where it would be of benefit of us to manage the board's system update settings via the Remote Management system.
Our preferred method of updating the boards would be to test an update on a few boards before allowing the update to roll out to the rest of our boards.
Rather than visit each board, we would like to be able to configure these settings via policies in Smart Remote Management.
2 votes -
lock
Ability to lock the buttons so that students can not play with them.
OR
A cover to hide the buttons.
OR
Move the buttons to the side of the screen: top-right and top-left.
It will stop little fingers from pressing buttons that they should not be able to reach2 votes -
Customize Display name
Paul Colbenson of CREC Museum Magnet School would like the ability to customize Display name of their GX-V3 displays as can be done with MX IQ enabled displays.
2 votes -
MX V5 - Enable support for HDMI-CEC, Default Input and Wake on source
MX V5 in use in meeting room scenarios often have peripherals attached that need to utilize HDMI-CEC, Default input or Wake on source.
One very relevant scenario is Microsoft Teams Rooms Devices. These control the display based on room occupancy using HDMI-CEC & wake on source. The default input option would be very useful, so make the MTR device the primary input. Users can then switch to iQ when needed..
1 vote -
Screenshare Window with Audio
Allowing audio to be Mirrored to the smartboard via the SMARTMirror app for one window only, not just for the entire screen.
1 vote -
Splitscreen bei SBID 7086R
Splitscreen, sodass man zwei Dinge gleichzeitig an der Tafel anschauen kann z.B. Kamera und Whiteboard.
1 vote -
Lock Down Screen Sharing
We have discovered that students have found out how to turn off the Pin needed and authorization needed to cast to the boards in the settings on the board. Since they can turn this off they can randomly cast to the boards with their phones and display whatever they like. There is also no way to lock the settings that we have found to keep them from doing this.
I have also learned that the Smart Remote Management can't control the screen share access. This has turned into a huge liability that we can't control.
1 vote -
Max volume limit
Max volume limit for the Smart board please. Perhaps an accessibility setting on the board. We have certain students that get music as reward/leisure and they try to turn the volume all the way up. When the sound then gets turned down to an acceptable level it can result in disruptive negative behaviors. Having these boards in a special needs environment makes this an essential feature. Thank you!
1 vote -
Lumio should have option to insert spinner, dice, and other interactive tools.
Lumio should have option to insert spinner, dice, and other interactive tools. You can use it in Smart Notebook, but not in Lumio.
1 vote -
Inking feature while on freeze mode on MX-V5 like on V3 and V4. This feature is for Chromebook users.
Since Chromebook users can't install SMART Drivers, this inking feature on freeze mode is a must. With MX-V3 and V4, this feature is loved by teachers but with V5, this feature is no longer available.
11 votes -
Enable Touch Calibration on Chromebooks
Please contact Google to enable the flag "Enable/disable touchscreen calibration option in material design settings" in the stable version of Chrome OS. This allows Smart Boards to work with Chrome OS by allowing touch input to apply to the correct display without having screen mirroring be on at all times, which is very impractical. Many schools and businesses would benefit from this as they cannot use flags due to security and privacy concerns. Because of not having this flag, Smart Boards become used primarily as non-interactive displays. This leads to schools abandoning them altogether. This feature has been a flag…
1 vote -
Split screen for MX-V2 series
"I could not find the Split screen option for 30 MX-V2s in my school. The iQ support page does explain you can tap the 'Recents', but I don't have that option. Please push an update to get that. " Submitted on behalf of the customer, case 766602.
1 vote -
We really need replacement pens and it is VERY disappointing that Smart has none and is not helping their customers.
We really need replacement pens and it is VERY disappointing that Smart has none and is not helping their customers.
1 vote -
Integrate Miracast with the Smartboard 6000S and MX with the SMART Mirror app
On Smartboard 6000S and MX, in the settings of the SMART Mirror app, integrate the menu item and function as with the 6000S v3 Miracast so that all teachers can use the same APP.
1 vote -
Sticky notes.
Sticky notes appear in the top right hand corner of the screen when using the GX series board. It would be more pedagogically correct to appear at the top left hand of the screen. In English we work from left to right. (I know we can move them but to reinforce this left to right working for our young users, it just seems wrong!
2 votes -
Allow more than 1 Admin Account on AM60 Module
At the moment, I have several instructors using my boards. They all have the work account on the AM60 (for security issues) but in order for them to log in to the board, I need to login first with my ID, apparently because I am the Admin account holder. This is a serious issue with usage especially when I am not in the office and I need to give instructors my PIN number.
1 vote -
Make Smart Podium 624 able to sense ONLY the stylus
It would be great for Smart Podium 624 to include a setting that makes the touch-screen respond ONLY to the stylus, not the user's hand. Currently, if your hand accidentally touches the screen as you annotate a slide, it causes the objects (text boxes, images, etc) on the Smart Notebook slide to jump around. Even palm-rejection gloves don't prevent this from happening.
1 vote -
Freeze Button
Have a Freeze button on the remote control to freeze and unfreeze the screen easily with one click.
Rather than a button that does multiple things and having to hold the button for ten seconds.
The Freeze button is the most important button on the remote control.
1 vote -
Fix pen mis detection issues on 40-point IR GX boards.
Either have a software update that better detects the thick end of the pen, or design and replace the physical pens with a thicker thick end, so they mis-detect less frequently as the thin end. Video below:
1 vote
- Don't see your idea?