127 results found
-
Changing the SMART Board pen default settings with SMART product drivers
Why is there no option to change the SMART Board pen default settings with SMART product drivers (like in the previous SPNL-6000 series)? So you can't set a default ink thickness for the pens which is highly missed. Every time people are using the pens on a SBID-6000S they have to adjust the ink thickness again and again. This is very confusing and inconvenient for the customers who are preferring a thinner ink as a default. Also it would be a good idea to be able to set the calligraphic ink as a default, too. Is this coming to the…
4 votes -
Hardware Idea Changes
Devices with and without intellegienz
2. devices installable lying down, without pen holder.
3. devices without touch (24/7, high haze level with USB-C and holes left/right, top/bottom for camera).
4. business apps for the device with improved functionality. Compatibility with Crestron (Crestron certified), Extron, etc
5. Teams and Zoom Certification1 vote -
1 vote
-
We need a "all in one Solution"
We need a solution like microsoft surface hub, avocord, Sharp collaboration display etc. in range from 55-86
1 vote -
Make OPS "network card" deactivatable
It should be possible to deactivate the network card that is passed on from the display to the OPS PC.
The background to this are "problems" in networks where certain images are installed via PXE boot based on the MAC address.
It happens again and again that the MAC address changes later.
2 votes -
Humidity/Temperature sensors
Make the values of the humidity and temperature sensors available via RS232. With this you would be able to create perfect learning conditions if you use these values in combination with a room control system which now can control the air quality or the temperature conditions in the classroom.
3 votes -
Replacement nibs for 6000S pens
It would be ideal if the nibs for the 6000S model pens could be available for purchase on their own. We have several pens with broken nibs or nibs that sometimes fall out.
3 votes -
Be able to tailor settings that are locked down using USB key.
It would be great if IT admins can specify which settings are locked with the USB key. For example, students in our school have found the brightness and contrast sliders in settings, and when both are turned all the way down it's pretty much a black screen. It's a lot of trial-and-error prodding to hit the right spot and get the sliders back up. It's such a massive waste of time when this is happening several times a day in multiple rooms across multiple sites.
An alternative to a tailored settings key would be to have one that locks out…
4 votes -
Get an external docking station or power supply for ICT for OPS
An ICT department who have many smartboard in many class will be easier to manage if we could have an external docking station or power supply to connect the OPS for test or pré installation in a domain to prepare massive deployment for example.
1 vote -
Workflows with the new SMART ID cards
It should be possible to store certain individual workflows on the new SMART ID cards. Imagine a teacher or a meeting room user walking up to a 6000s, taping on the 6000s screen with his/her SMART ID card and then the predefined workflow starts automatically:
- the user will be logged on to SMART iQ™ with the SMART account
- the predefined app is going to launch (i. e. SMART whiteboard or SMART TeamWorks™/PowerPoint)
- the predefined file opens
- the app browses to the predefined page/slide
This would be a real USP and it would meet the needs of teachers or meeting room…
1 vote -
Picture in picture
Picture in picture to allow teacher to show their presentation/software on one half of the screen from HDMI source and the other half to be able to use as a independent whiteboard if they need to quickly write a note/equation
4 votes -
SMART Board® GX series no Proxy settings on Wifi connection
There is no ability to set proxy setting in the Wi-Fi connection on the GX Series Boards. Needs to be similar to how this works on the MX Series. (Using latest Firmware as on Aug 2021)
1 vote -
bring back the small eraser
I used to have a Smart Board 6000 series and the nicest feature was the mini eraser on the end of the pens. I recently got a new MX series board and I'm very disappointed by the lack of small eraser. I'm a teacher and being able to erase a small section instead of using my palm to erase it all is a lot easier when it comes to teaching.
3 votes -
Change default Colour Temperature
Please, change the default Colour Temperature on Smart Boards 7000R Series from Cool to Neutral.
Problem is that with selected Cool colour temperature Smart Boards are not able to display LIGHT GREY colours.
For example, go to https://www.google.com/drive/ in the iQ browser with the default colour temperature called Cool. Then go to the same www page with the Neutral colour temperature selected. The difference is clearly visible on our 7000R display - see attached photos.
2 votes -
SMART modelo MX100 y webcam
Tenemos una pantalla SMART modelo MX100 comprada recientemente y no podemos conectarle una webcam. Nos parece increible que una pantalla tan reciente y no muy barata para un centro escolar no soporte la conexión de una webcam para videoconferencias.
¿Se podría hacer algún tipo de actualización del software para solucionar este inconveniente?
2 votes -
Ability to increase quality of screenshots or saving of whiteboards to file
Ability to increase quality of screenshots or saving of whiteboards to file - currently low quality - an option to save as a PNG or higher resolution as the PDFs currently saved are highly compressed and low resolution.
2 votes -
IP based control or upgrade on RS232
It would be nice to be able to send many commands via RS232 at once and that the product can support that. Example: sending a volume up command consistently by +1 though a room controller.
Alternatively, it would be nice to have a way to control your SMART products with room control hardware using IP based controls.
Ref: 417637
10 votes -
ADA Compatible
I would like to see the SMART displays have the ability to choose the icons from the OPS side (such as the widgets) to be accessible from the bottom of the screen to allow access to individuals who may be shorter or having to access these icons from a wheelchair.
2 votes -
iQ selection using RS232 or IP control
another customer request to be able to select iQ applications via RS232 or IP control. Currently we are only able to switch input. Customers would like to trigger whiteboard, screen sharing etc.. via room control command
4 votes -
SMART TV Integrated Webcam & Microphone
We would like to see a webcam and microphones integrated in to the SMART TV's. With the explosion of hybrid classrooms, we are seeing our teachers consistently request webcams be mounted above the TV's and 50-60' USB cables run to the PC's so the students at home can see the teacher/classmates/classroom during a meet. It seems like a no-brainer to integrate a webcam and multi-field microphones in to the interactive displays.
2 votes
- Don't see your idea?