43 results found
-
8 votes
Split screen is available on V3 and V4 displays running iQ 3.12 or newer. You will be able to run multiple apps at the same time.
Unfortunately, Android doesn't allow displaying multiple instances of the same app at the same time. So you can't have 2 browser tabs displayed side by side.
However, you can have the browser and whiteboard side by side at the same time.
-
Able to choose input at startup
It would have been good if it was possible to choose which input signal should be opened on the smart screen when starting the computer. Afterwards, you should of course be able to choose another input signal if you want to switch. This is to avoid selecting the correct input signal every time the smart screen is started.
1 voteGood news! There's a setting to configure which input the board will automatically switch to on start up. Take a look at Settings> System> Default input.
-
Allow app updates from management console to push to all devices at once. (Smart Mirror especially)
We have many smart panels for our school (one in each class!) and we cannot seem to find a way to push app updates from the management console to the panels all at once. We are having to physically go to each smart panel in the entire school to update the Smart mirror app one by one. Very annoying!
8 votesHere are the instructions to deploy SMART Mirror updates via SRM: https://support.smarttech.com/docs/software/iq/screen-share/en/downloads/mirror-apps/receiver.cshtml
-
Add Support for Extend Display with SMART Mirror App
It would be great to be able to present and extend the display to the SMART Board, using the SMART Mirror Windows App.
This is possible with Miracast but there are bugs with Miracast I have raised with support but been told can't be fixed.1 voteNow you can choose to share an entire screen (from your primary or secondary monitor) or a window using the desktop app.
Check out the full SMART Mirror release notes
-
1 vote
Sur les SMART Boards MX-V3, MX-V4 ou 6000S-V3, iQ 3.15 peut avoir deux fenêtres à l'écran.
Voici la page d'aide en anglais : https://support.smarttech.com/docs/software/iq/en/getting-started/split-screen.cshtml?cshid=splitscreen#
-
Disable the overlay when using the chromium browser
When using the chromium browser it would be nice for the ink to write directly on the page instead of having the overlay
1 voteYou can disable the overlay layer by going into Settings> Annotation and toggling the Enable annotation layers option.
Within that Setting, you can also disable the annotation layer for specific apps.
-
WOL
My suggestion is to implement a WOL (Wake On Lan) on the displays with Smart Boarding with IQ as it would be a good way to be able to control the displays 100% remotely without having the need to have them close by. Especially the fact of being able to turn them on at the user's needs without having to press the power button. Thank you.
1 voteGood news! You can enable WOL by going into Settings> Power and selecting Network Standby (Sleep).
More information can be found here: https://support.smarttech.com/docs/hardware/displays/smart-board-mx/en/adjusting-iq-settings/iq-settings.cshtml?cshid=date-time#datetime and
-
Native Screen Share form Windows and Android devices.
We would suggest returning the native screen share from Windows devices to iQ (SMART Mirror - V3). It is annoying for occasional / roaming users that they have to download a screen sharing app. Most users share content from Windows devices.
9 votes -
Hide Onscreen Keyboard
The onscreen keyboard is often in the way, and after moving it to a nice place, it pops back up in the way again. Would like an option to disable, dock, or hide. We use connected wireless keyboards anyway.
2 votesThis is available on SMART Board V3 and V4 displays running iQ 3.14 or newer in Settings> Language> Physical keyboard options> Use on-screen keyboard.
-
Shutdown via Smart Remote Management
Shutdown via Smart Remote Management would be highly appreciated!
10 votes -
Notebook Player Business Display
Make the Notebook Player also available for business displays. As there are many users there as well.
2 votesThe Whiteboard app is now available on Business displays for SMART Boards running iQ 3.8 or newer.
-
Writing with Fingers in Whiteboard
Writing with fingers or other substitutes in whiteboard. Would be very helpfull for disabled kids or in primary schools.
5 votesThe iQ Whiteboard now includes the option to enable inking with the finger. Details here: https://support.smarttech.com/docs/software/iq/en/using-smart-whiteboard/finger-inking.cshtml
-
Lock screen in SMART iQ™
There have been several requests by customers for a lock screen in SMART iQ™ (not the scenario with a computer connected to the SMART Board® interactive display, where you can easily just lock Windows or macOS X).
Both, teachers and business users, need to have a feature where they easily can lock the SMART iQ™ screen with a PIN when they are making a break. Teachers don't want students to play around with SMART iQ™ in a break and business users want to cover secret information that might be visible on SMART iQ™ for others, entering the meeting room…17 votes -
When a teacher enters their account and password in IQ, currently the screen displays the password for a short time before it turns to a dot
When a teacher enters their account and password in IQ, currently the screen displays the password for a short time before it turns to a dot. This could be easily seen by a student who would then have the teacher’s single-sign-on password that could give them access to other systems and documents – a potential security/ privacy issue. The password letters should not be viewable at all.
16 votes -
Create and curate an informal list of known working apps and games for the AM40/50 Android modules. Just add a disclaimer.
Create and curate an informal list of known working apps and games for the AM40/50 Android modules. Just add a disclaimer that these are 3rd party apps and are not supported by Smart. Having some idea of apps that have at least worked for others would be very helpful.
2 votesThanks for the suggestion. I’d love to get your ideas here on what apps you would like to see.
iQ 3.5 includes an app store to download and install Android apps to the SMART Board. You can access this by going to the Apps library and then clicking on the New tile.
We’re starting to add more apps. More to come!
-
Enable pdf export with higher (usable) resolution
Exported whiteboard files via pdf stick are very small in their resulting screen size. This makes most of the notes pretty unusable, as written texts are drastically reduced in size. Starting from a 4K screen it should be no problem to export the file in an adequat resolution.
2 votesThanks for the feedback. Improvements have been made in iQ 3.5 related to PDF export. Your boards should be updating to this version if it is connected to the internet.
-
1 votecompleted · AdminSMART Technologies Product Management (Product Manager, SMART Technologies) responded
This is possible now. Press and hold the favorited page tile to go to edit mode, then just touch the title on the tile to start editing.
-
SMART management console
Hello , could you enable the download in the chromium browser app in the IQ module?
With the SMART remote management console i can install many files reader app
Save and read the files downloaded by the browser could be very usefull
Regards3 votesThanks for the feedback. The Browser in iQ 3.5 now allows users to download files. Your boards should be getting the update shortly.
-
View pdf dowloaded from browser or view pdf in browser
We are missing an important feature for showing pdf's to our clients.
The board is used to show our site and webshop - with links to pdf's.
If we click on these pdf's we see 'downloading is not supported'.
We don't want to download the file, we want to view the file...I know you can insert a usb and view pdf's, but is very time consuming. The same with connecting a pc to it.
Thanks!
2 votesiQ 3.5 can now download and open PDFs from the Browser. Your boards should be updating to this version if it’s already connected to the internet.
-
Touchable Surface
Would like the option to lock the touchable black panel. Just above the pens on the 7000 series. In and outside Teamworks.
So that instead of a user by mistake managed to just click a bit above. They are taken to the iput screen.
Would like it to work as its done in the OPS (IQ mode)1 votecompleted · AdminSMART Technologies Product Management (Product Manager, SMART Technologies) respondedIn the original designs, the entire black bar at the bottom of the screen functioned as the home button. As you’ve discovered, this could result in unintended switches back to iQ/Input. The latest touch firmware for the 7000 series (released in June as an OTA update) reduces the size of the home button to only the light-up portion of the bottom of the screen to reduce the frequency of these unintentional switches.
- Don't see your idea?