103 results found
-
Option to disable input popup
I would like the option to disable the popup for switching inputs when you plug something in. Our staff uses multiple inputs and that popup just gets in the way. One froze on the screen for a whole day and the teacher had to work around it. If it is going to be useful, we should have the option to keep it up long enough to be able to get to it before it goes away. So length of time options as well as disabling would be nice.
1 vote -
Minimize Pause Indication + Audio pass through while paused
Hello, I may have a unique request. My school district recently acquired the SMART Board MX series for our classrooms in order to replace our aging projectors. I frequently use to the pause function to flip through slides on my computer, which is tethered to the board. (It works better for me than using it as an extended display). While paused, the old projector would display a small, unobtrusive "freeze" message in the top right corner. I could flip back and forth subtly, with minimal visual disturbance for my students. On the SMART Board however, it displays a huge pause…
1 vote -
Disabling ethernet ports of SMART displays & Support for LLDP
It should be possible to turn off the two RJ45 ports of the SMART displays. Some customers have a specific device "logic" in their network, based on the MAC address of the network card. Every device with a specific MAC address will get specific policies. When you have a scenario with a SMART display including an OPS PC PCM11 we have a total of 3 MAC addresses, depending on where you plug-in the ethernet cable. According to customers you will get randomly one of the two MAC addresses when using the RJ45 hub of the display and you can't know…
1 vote -
Make Smart Board boot directly into AM60-module and make it possible to use the SmartBoard buttons with the module
The AM60 IQ Compliance Module is considered an enhancement by SMART, but I find it very annoying that our MX-board need to boot in to the on-board PC, instead of just booting into the AM60 Module.
WHen I insert an AM60 Module, the onboard PC should be downgraded to a bridge and just allow the module to function as the primary system device.
At the same time, it is not possible to use the Smart Board's physical buttons with the module. They should be bound to the module when activated.
That would enhance the experience and make the AM60 module…
3 votesThanks for the idea. Our engineering teams have started on implemented this to make the AM60 an integrated module when connected to the display. We're expecting to deliver this in an upcoming iQ firmware update.
-
Allow common alerting protocol
Allow SMART GX model TVs to receiving common alerting protocols for campus/school wide emergency alerting. Similar to the Advanced Messaging system, allow for a system that would connect to a building's fire alarm or lock down system using common protocols to display emergency messaging on specific tvs or all tvs.
1 vote -
New whiteboard page
Hi, I would like to have the possibilities to add a new whiteboard page lower down, for example to press the plus sign (like it is in Lumio).
We also had recognize that the picture with three clocks is under the label manipulatives but there is no interactivity, so it should be under the label organizer instead.1 vote -
Make your boards more modular
Instead of coming out with the latest and greatest versions to mimic Apple’s unrealistic release schedule, please make your boards more module and spend the time to upgrade and update existing technology. Nothing says “Don’t buy more Smartboards” like knowing your current tech you just spent hundreds of thousands on is now headed for the discontinued section. Make the side input ports more modular and replaceable (HDMI 2.1 for instance), and include cameras, RFID readers and other future enhancements all as modules on current boards. I don’t know who thought it would be a good idea to have your current…
1 vote -
Homebildschirm
Hallo, wir haben einen SBID-GX086-v2 im Einsatz. Ich habe dort als Hintergrundbild ein individuelles Bild meiner Firma im Einsatz. Leider wird unser Logo etc. komplett von den angehefteten Apps + Uhrzeit/Datum verdeckt.
Die Apps kann man nicht verschieben, z. B. in eine Ecke des Bildschirms. Oder warum kann man die Uhrzeit / Apps nicht ausblenden?
LG1 vote -
Contrast
The image quality of the 6000S series is insufficient. This could be solved by adjusting the contrast of the display. At the moment this is not possible. My request is to make it possible to adjust the contrast of the display.
1 vote -
Smart ID Card Setup
The school has 50 to 70 teachers, ranging from pre-school to high school. It is challenging for them to set up the Smart ID cards individually in front of the panel. This is not efficiency & security for the school.
Is there a possibility for Smart ID card setup via cloud-based platforms, web pages, Smart Remote management, or other means?
And can the ID/Password be configured in bulk using a CSV file to synchronize with the Smart ID cards, under the administration of the school's IT staff.4 votes -
Larger Cursor
Would love a larger cursor when connecting my computer to the board.
2 votes -
Physical screen protector
Can we recommend or have a disposable screen protector for our screens for harsh environments?
2 votes -
Can we have a budget secure version offering? A simple Gx with everything removed?
Coming from Rene Zbynovsky
0 votes -
Remove lock pin
Please give us a way to remove lock pins. It's easy enough to create and change the lock pin, but there's no way to remove it. Now that I've been able to set up my Smart card, I don't need a lock pin. I'd like to remove the pin from my board and there's currently no way to do so.
3 votesThanks for your feedback.
We're currently looking at ways to provide options to relax the security requirements for the SMART cards so that PINs are optional.
-
Make a smaller version of the Smart Podium 624
The Smart Podium 624 works well in a lot of our classroom spaces, but sometimes it's too big for some of our smaller lecterns. We'd like to see a smaller version that could be used for these spaces.
1 vote -
Touch Screen Sensitivity
I've had several customers comment on how they would like to be able to adjust the touch screen sensitivity. The main reason would be to decrease the sensitivity to avoid false triggers.
3 votesReviewing to see if this kind of customization is possible within Android.
-
Downloaded PowerPoint
Would LOVE if when we download a PowerPoint to the Smart Panel if it would automatically open in Lumio
2 votes -
jring0@eq.edu.au
Implement video support on the MX v2 series to allow 16:10 aspect ratio via a firmware update. The school I provide technical support for have acquired laptops with a native 1920x1200 resolution requires recalibration/orient and we're hoping to maximise screen real estate on the SMARTBoards
1 vote -
Please update the V2 iQH811 boards to actually turn off the on-screen keyboard.
Please update the V2 iQH811 boards to actually turn off the on-screen keyboard when a physical keyboard is plugged in. As of now the toggle does nothing but the toggle works on newer boards. Please continue to support older hardware (that is not really old at all).
1 voteThank you for reporting this. This is currently being investigated.
-
Please update MX086-V2 drivers to fix issue with On-Screen keyboard and Windows
We have an Smart Board MX086-V2 and at some time the on-screen keyboard started to not pop-up when the signal from our PC with Windows 10 is shown in the board. The on-screen keyboard works well with the board menus (settings and so on) and even when Windows is configured in tablet mode. But with normal mode of Windows we are forced to use the Windows virtual keyboard. SmartTech support says it is a bug in the latest V2 drivers (we have an MX086-V4 working well). Please consider an update in the Windows drivers or the board embedded system to…
3 votes
- Don't see your idea?